PRO AV CATALOG
Voice-quality Intercom for Standard IP Based Networks
Model: IPW-1A
- Cost-effective multi-PC based design
- Compatible with IE Series sub stations
- Scalable to hundreds of stations / locations
- Works with standard wired and wireless network infrastructure
- Digital audio recording and playback capability via included software
- Cost-effective multi-PC based design
- Compatible with IE Series sub stations
- Scalable to hundreds of stations / locations
- Works with standard wired and wireless network infrastructure
- Digital audio recording and playback capability via included software
- Relay output for remote release (N/O or N/C)
- Reset switch (reset unit)
- RS-232 Serial Port (for firmware recovery)
- Green and Red Status Lights
- Sub station connector
- Mounting rail slots
- RJ-45 10/100 Ethernet jack & connection indicator LED’s (network connection)
- Power input connector
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Maximum): 24 Volts
- AC Voltage (Minimum): 15 Volts
- DC Voltage: 30 Volts
- Depth: 3.06 in
- Height: 0.50 in
- Width: 3.75 in
- Network Interface: 10/100 Base-T Ethernet (auto detection) RJ-45
- IP assignment: Static or dynamic
- Hardware Protocols:
TCP/IP
UDP
DHCP
SNMP
AutoIP
SonicIP
Ipzator - Transport Bandwidth:
128Kbps per active session (normal mode)
64Kbsp per active session (low bandwidth mode) - Audio encoding:
PCM (raw)
G7II (uLaw) - Audio Sampling:
16bit at 8kHz (normal mode)
8bit at 8kHz (low bandwidth mode) - Output Level: Determined by sub station
- Relay contact rating: 30VDC / 1.0A (resistive)
- Wiring: Door to adaptor: 2-cond., overall shield
- Wire Type: Door to adaptor: Aiphone #822202
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com