PRO AV CATALOG
Signal Processor with Digital Audio Bus
Model: BLU-160
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Digital Outputs (AES/EBU and S/PDIF)
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- Clear Front Panel LED Indication
- Informative Front Panel Display
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO Integration
- Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 41 F
- Depth: 12.50 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 9 lbs
- Front Panel Led Indicators-Per Input: Signal Present, CLIP, SYNC/48V, I/O card type (IN, OUT, DIG, AEC)
- Front Panel Led Indicators-Other: LCD Display, Data Activity
- Analog Inputs: Up to 16 electronically balanced on Phoenix Combicon removable screw connectors
- Mic/Line Inputs: Nominal gain 0dB, electronically switchable up to +48dB,in +6dB steps
- Input Impedance: 3.5 kohm
- Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
- CMRR: >75 dB at 1KHz
- Input Noise (E.I.N.): <-128 dBu typical with 150ohm source
- Phantom Power: 48 V nominal, selectable per input
- A/D Latency: 38.7/Fs
- Digital Inputs: Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors
- Input Impedance: 110 ohm (AES/EBU), 75 ohm (S/PDIF)
- Sample Rate: 48kHz or 96kHz
- Sample Rate Conversion: 8kHz-96kHz
- THD+N: <-140 dB
- Latency: 3/Fso + (56.581/Fsi) + (55.658/Fso)
- Analog Outputs: Up to 16 electronically balanced on Phoenix/Combicon removable screw connectors
- Maximum Output Level: +19 dBu
- Frequency Response: 20Hz-20KHz (+0.5dB/-1dB)
- THD: <0.01% 20Hz to 20KHz, +10dBu output
- Dynamic Range: 108 dB typical, 22Hz-22KHz unweighted
- Crosstalk: <-75 dB
- D/A Latency: 28/Fs
- Digital Outputs: Up to 16 AES/EBU or S/PDIF on Phoenix/Combicon removable screw connectors
- Output Impedance: 110 ohm (AES/EBU), 75 ohm (S/PDIF)
- Sample Rate: 48kHz or 96kHz
- Sample Rate Conversion: 8kHz-96kHz
- THD+N: <-140 dB
- Latency: 3/Fso + (56.581/Fsi) + (55.658/Fso)
- Control Ports: 12 inputs and 6 outputs
- Control Input Voltage: 0 to 4.5 V
- Control Input Impedance: 4.7kohm to +5V (2-wire mode), >1Mohm (3-wire mode)
- Logic Output Voltage: 0 or +5 V unloaded
- Logic Output Impedance: 440 ohms
- Logic Output Current: 10mA source, 60mA sink
- Watchdog Output: Phoenix/Combicon connector for failsafe control
- Opto Output Current: 14 mA maximum
- Withstanding Voltage: 80 V maximum (Off)
- Series Impedance: 220 ohm (isolated)
- Connectors: RJ45 Ethernet connector
- Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch
- Connectors: 2 x RJ45 Ethernet connectors
- Maximum Cable Length: 100m/300ft on Category 5e cable between devices
- Maximum Number of Nodes: 60
- Latency Per Node: 4(+/-1)Fs
- Mains Voltage: 100-240 V AC 50/60Hz
- Power Consumption: <35 VA
- BTU Rating: <188 BTU/hr
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com