PRO AV CATALOG
3.5" 600W Ribbon Line Array Ceiling Surround Speaker
Model: LA3C
Part #: 145-111104-01
- Exclusive single enclosure, parabolic line array design
- Perfect timbre matching with the Christie LA series speakers
- 12 x 3.5" ribbon drivers, plus 4 x 5.25" paper/Kevlar composite cone drivers
- Dramatically higher RMS to peak max SPL ratio than compression driver systems
- Approximately four times the optimal listening area than point source systems
- Exclusive single enclosure, parabolic line array design
- Perfect timbre matching with the Christie LA series speakers
- 12 x 3.5" ribbon drivers, plus 4 x 5.25" paper/Kevlar composite cone drivers
- Dramatically higher RMS to peak max SPL ratio than compression driver systems
- Approximately four times the optimal listening area than point source systems
- Extremely even, wide 120° x 120° coverage, typically within 4-6dB SPL throughout the entire audience area
- Enhanced clarity and voice intelligibility of surround effects
- Overhead rated with integrated mounting points
- Limited five year warranty
- Horizontal Symmetry - Yes
- ISO 14001 Certification - Yes
- ROHS Compliant - Yes
- Vertical Symmetry - Yes
- Warranty - Yes
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 3.50 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 80 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- Construction: 18mm marine plywood(Enclosure)
- Coverage Horizontal: 120 degrees
- Coverage Vertical: 120 degrees
- Impedance: 4 ohm
- Maximum SPL (Sound Pressure Level): 132 dB
- Power Handling: 600 Watt
- Sensitivity: 95 dB
- Depth: 15.10 in
- Height: 37.50 in
- Width: 9.40 in
- Net Weight: 46 lbs
- Warranty (Length/Type): 5 Years Limited
- Regulatory Compliance: WEEE
- System Type: Coaxial parabolic ribbon driver line array, 2-way, passive, in a single vented enclosure
- Driver Components:
-
12 x 3.5" ribbon drivers with Kapton diaphragm and Neodymium magnets
8 x 5.25" paper Kevlar composite cone drivers - Crossover: Linear phase, 2-way, passive @ 1.5kHz 12dB/octave
- Maximum SPL: 120dB SPL continuous
- Power Handling: 1200W (IEC) short-term (12dB crest factor)
- Recommended Amplifier Power: 540-870W (FTC) @ 4ohms
- Input Connectors: Screw terminal barrier strip
- Enclosure:
-
Closed box alignment
Heavily damped and braced
Rated for overhead applications - Mounting Options: Ceiling mounted using 4 x M8 points
- Accessories (optional): Allen Products MM-022
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com