PRO AV CATALOG
Professional Graphic Equaliser with Long-throw 45mm Oil-damped Faders
Model: DN370
- Long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution
- All-new proportional-Q filters provide optimum control without undesirable audio artifacts
- Gain control with +6dB/-infinity range and centre detent at unity gain. Allows effective muting of channel in emergencies
- Range switch selects ±6dB or ±12dB operation for the faders, with LED indication
- Channel bypass switch with LED indication. The unit also provides automatic relay bypass in the event of power failure
- Long-throw 45mm oil-damped faders with dust cover for increased accuracy and resolution
- All-new proportional-Q filters provide optimum control without undesirable audio artifacts
- Gain control with +6dB/-infinity range and centre detent at unity gain. Allows effective muting of channel in emergencies
- Range switch selects ±6dB or ±12dB operation for the faders, with LED indication
- Channel bypass switch with LED indication. The unit also provides automatic relay bypass in the event of power failure
- Bypass switch with status LEDs for quick comparison of applied EQ
- Power switch, fully recessed in the on position to avoid accidental operation
- Signal present LEDs show the presence of audio signals above -40dBu
- IEC mains inlet, the unit automatically adjusts for operation on all voltages from 100 to 240V AC
- KT logo for quality engineering and reliability 3-year KT warranty for peace of mind
- Equalizer Type - Graphic Equalizer
- Height: 133mm (5.25 inch) (3U High)
- Width: 482mm (19 inch)
- Depth:
205mm (8 inch)
- Product Weight: 12.79 lbs
- Shipping Weight: 15.43 lbs
- Depth: 8 in
- Height: 5.25 in
- Width: 19 in
- Impedance: 20,000 ohm
- Impedance: 20 k?
- Input two type: Electronically balanced (pin 2 hot)
- Maximum Input Level: +22 dBu
- Outputs Two type: Electronically balanced (pin 2 hot)
- Minimum Load Impedance: 600 ohms
- Source Impedance: <60 ohms
- Maximum Level: +22 dBu
- Frequency Response: 1kHz ±0.5 dBu 20Hz-20kHz
- Eq Out: ±0.5 dB
- EQ In: (flat) ±0.5 dB
- Distortion (THD+N): <0.003% at 1kHz,+4dBu
- Dynamic Range: >114 dB (20Hz to 20kHz unweighted, ±12dB range)
- Overload Indicator: +20 dBu
- Gain: -infinitive to +6 dB
- Equalisation: 30 Bands
- Centre frequencies: To BS EN ISO 266:1997 25Hz to 20kHz, 1/3 octave tolerance ±5%
- Maximum Boost/Cut: ±6/12 dB
- High Pass Filter Slope: 12 dB/Octave
- Low Pass Filter Slope: 12 dB/Octave
- Notch Filter Attenuation: >17 dB
- Q: 32
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com