PRO AV CATALOG
2 Channel, 400 W, Dedicated Installation Amplifier
Series: E Series
Model: E 4:2
Part #: 992292011
- High power density – 2 x 400 W in 1U
- Certified Energy Star 2.1 compliant
- Flexible – IntelliDrive delivers similar power per channel at 70 V, 2, 4, 8 and 16 ohms
- Asymmetric loading
- IDEEATM output stage based on patented Class D technology
- High power density – 2 x 400 W in 1U
- Certified Energy Star 2.1 compliant
- Flexible – IntelliDrive delivers similar power per channel at 70 V, 2, 4, 8 and 16 ohms
- Asymmetric loading
- IDEEATM output stage based on patented Class D technology
- High efficiency – Extremely low power consumption and heat output
- Auto-standby function - with power consumption < 1 W in standby state
- Exceptionally low cost of ownership over lifetime
- RSL switch - Circuit senses rail voltage and optimizes output for instantaneous load conditions
- Efficient cooling – One temperature-controlled fan
- Comprehensive circuit protection and fault indication
- Amplifier Signal Type - Audio
- Amplifier Type - Other
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 40 kHz
- Maximum Frequency Response (Bandwidth): 40000 Hz
- Minimum Frequency Response (Bandwidth): 2 Hz
- Minimum Frequency Response (Bandwidth): 0 kHz
- Impedance: 20000 ohm
- Number of Channels: 2
- Number of Watts Per Channel: 200 Watt
- Power Handling: 400 Watt
- Rack Units (Height): 1
- Signal to Noise Ratio: 112 dB
- Total Harmonic Distortion + Noise (THD+N): 0.10 %
- AC Voltage: 265 Volts
- Current Draw: 11 Amps
- Depth: 10.87 in
- Height: 1.73 in
- Width: 19.02 in
- Product Weight: 8.82 lbs
- Color: Black
- Warranty (Length/Type): 3 Years
- Max. Output Power Per ch. (all ch.’s driven):
- 2 ohms (Lo-Z mode): 200 W
- 4 ohms (Lo-Z mode): 200 W
- 8 ohms (70 V mode): 200 W
- 16 ohms (70 V mode): 200 W
- 70 V (70 V mode): 200 W
- 8 ohms (Lo-Z mode): 100 W
- 16 ohms (Lo-Z mode): 50 W
- Performance:
- THD at 1 kHz and 1 dB below clipping: <0.05%
- Channel separation (Crosstalk) at 1 kHz: >70 dB
- Frequency Response: 2 Hz - 40 kHz
- Common Mode Rejection (CMR): 50 dB
- Output Impedance: 25 mOhm
- Gain, Sensitivity and Limiters:
- Limit and gain switch (per channel): 2 pos: Lo-Z and 70 V
- VPL for 70 V mode: 100 V
- VPL for Lo-Z mode: 69.3 V
- Sensitivity for 70 V out in 70 V mode: 4 dBu
- Sensitivity for full power into 4/8/16 ohms in Lo-Z mode: 4 dBu
- Gain in 70 V mode: 35.2 dBu
- Gain in Lo-Z mode: 27 dB
- Level adjustment (per channel): Rear panel potentiometer, detented from -inf to 0 dB
- Connectors and Switches:
- Input connectors (per ch.): 3-pin detachable screw terminals, electronically balanced
- Output connectors (per ch.): 2-pin detachable screw terminals
- High Pass Filter: Fixed at 35 Hz, switchable per channel
- Power Control: Can be used to go between standby and ON
- GPI (power control input): Contact closure type, 2-pin detachable screw terminal, controls the power state
- GPO (power state output): Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state
- Cooling: Single fan, front to rear airflow, no filter required, temperature controlled speed
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com