PRO AV CATALOG
Active Single-Pair Receiver - Twisted Pair Format-A - XLR mic/line output
Series:
Model: D-TPR1A
- Balanced Mic or Line Level XLR Output
- Switch-Selectable Output Level on Rear Panel
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45s
- Remote Powering through Twisted Pair Cable
APPLICATION: The -TPR1A modules feature an XLR output jack. A rear-panel switch set during installation determines which of the three FORMAT-A pairs is buffered to feed the module output. The audio signal received from the selected pair of the RJ45 INPUT jack feeds the XLR audio output jack. The output level from the XLR jack is set to either MIC or LINE level during installation using a rear-panel switch.
This module receives signal from only one cable pair, so the D-, DS-, and AF modules have a second RJ45 jack to connect cables to additional receiver modules. Installers simply connect the conductors of two cables in parallel on the EM- model terminal block. Two other single-pair receivers may be chained to the second RJ45 jack, or a single two-pair receiver may be connected. In addition to completing the reception of signals from all three FORMAT-A pairs, additional receivers may be connected to the same twisted pair feed. The bridging input circuits used in all FORMAT-A twisted pair receivers allow connection of up to 10 receiver outputs for each cable pair. The possibility of multiple receiver locations adds enormous flexibility in the design of audio routing systems using RDL FORMAT-A products. The power pair and all three audio pairs are fed through both rear-panel RJ45 jacks.
The -TPR1A may be powered directly from a 24 Vdc power supply using the rear-panel detachable terminal block.
- Balanced Mic or Line Level XLR Output
- Switch-Selectable Output Level on Rear Panel
- Switch Selects which Pair (A, B or C) Feeds the Output
- Signal and Power Pair Pass-through on RJ45s
- Remote Powering through Twisted Pair Cable
- Fused Local Power Feeds all Connected Modules
- Local Power Input on Terminal Block
- Blue LED Indicates Module is Powered
- Daisy-Chain with Additional Format-A Receivers
- Studio-Quality Precision Active Balanced Circuitry
- Inputs: RDL Format-A
- overall length: RJ45 (Models D-, DS-, AF-); Detachable Terminal Block (Model EM-)
- Format-A Signal Pair Used: Switch-selectable A, B, or C
- Format-A Output: RJ45 (not applicable to EM-)
- Outputs: 150 ohm balanced
- Output Connection: XLR
- Output Level: -45 dBu Mic or +4 dBu Line Level, Switch-selectable on rear panel
- Frequency Response: 10 Hz to 50 kHz (+/- 0.1 dB)
- THD+N: < 0.005%
- Noise below +4 dBu: < -90 dB
- Headroom above +4 dBu: > 18 dB
- CMRR: > 80 dB (50 Hz to 150 Hz)
- Indicator: Power In
- Power Connections (2): Detachable terminal block; RJ45
- Power Requirement: 24 Vdc @ 45 mA plus connected loads
- Dimensions:
EM-TPR1A: 1.77" (45 mm) W and H; 1.93" (4.9 cm) D
D-, DS-TPR1A: 1.6" (4.06 cm) W; 4.11" (10.45 cm) H; 1.89" (4.8 cm) D
AF-TPR1A: 2.22" (5.64 cm) W; 2.77" (7.04 cm) H; 1.89" (4.8 cm) D - Mounting Box Minimum Depth: 2.4" (Models D-, DS-, AF-); 39 mm (Model EM-)
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- DC Voltage: 24 Volts
- Depth: 2.40 in
- Shipping Weight: 0.35 lbs
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com