PRO AV CATALOG
12-Inch Microflex Gooseneck Cardioid Mini-Condenser Microphone with Desktop Base
Series: Shure
Model: MX412D/C
- Recommended for general sound reinforcement applications
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Programmable on/off switch and LED on/off indicator
- Logic input and output terminals for remote control or use with automatic microphone mixers
- Recommended for general sound reinforcement applications
- Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
- Balanced, transformerless output for increased immunity to noise over long cable runs
- Programmable on/off switch and LED on/off indicator
- Logic input and output terminals for remote control or use with automatic microphone mixers
- Snap-fit foam windscreen
- Desktop base with 10ft cable
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Other
- Microphone Type - Mini Condenser
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 135 F
- Operating Temperature (Minimum): 0 F
- Maximum Frequency Response (Bandwidth): 17 kHz
- Maximum Frequency Response (Bandwidth): 17000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Maximum SPL (Sound Pressure Level): 123 dB
- Sensitivity: -33.50 dB
- Signal to Noise Ratio: 65 dB
- Product Weight: 1.79 lbs
- Shipping Weight: 3.59 lbs
- Polar Pattern: Cardioid
- Output Impedance: Rated at 150 ohms (180 ohms actual) at 1000Hz
- Open Circuit Sensitivity: –33.5dBV (21.1mV) at 1kHz, ref. 1V per Pascal), 1 Pascal = 94dB SPL
- Maximum SPL: 123 dB (1kHz at 1% THD, 1k ohms load)
- Equivalent Output Noise: 29 dB SPL (A-weighted)
- Signal to Noise: 65 dB (referenced at 94dB SPL)
- Dynamic Range with 1k ohms load: 94 dB
- Pickup Angle: 130 degree (–3dB)
- Common Mode Rejection: 45 dB (minimum)
- Mute Switch Attenuation: 50 dB (minimum)
- Preamplifier Output Clipping Level: –6.0dBV (0.5V) (1% THD)
- Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of XLR output connector
- Power Requirements: 11 to 52V DC phantom, 2mA
- Relative Humidity: 0 to 95 %
- Type: The attached custom cable contains a shielded audio pair and three unshielded conductors for logic control
- Cable Overall diameter: 0.165 in (0.6 mm)
- Certification: Eligible to bear CE Marking, Conforms to European EMC Directive 89/336/EEC, Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments
- Cable Length: 10 ft
- DC Voltage: 52 Volts
- Dynamic Range: 94 dB
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com