PRO AV CATALOG

Pro AV Catalog

Cables & Connectors : Adapters : Switchcraft, Inc. - PC12A

All Products

1/4-inch Mono 2 Conductor Jack with Nut and Washer, PC Terminals, Tip is Shunt

Model: PC12A

Available with .25 inch inside diameter bushings

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Littel-Jax phone jacks mate with standard commercial phone plugs and are available with .25 inch inside diameter bushings.

Available with .25 inch inside diameter bushings

Adapter Type - Audio
Connector Type 1 Gender - Female
Adapter/Connector Type 1 - Other

Life: Commercial Jacks - 10,000 insertion/withdrawal cycles, minimum. Military Jacks - 20,000 insertions/withdrawals, minimum
Mechanical Shock: Military Jacks - Per MIL-STD 202, method 213, Test Condition H (75g)
Vibration: Military Jacks - Per MIL-STD-202, method 213, (10-55 Hz)
Contact Resistance: Commercial Jacks - .030 ohms maximum, Military Jacks - .010 ohms maximum (initial)
Insulation Resistance: Commercial Jacks - 10,000 M(omega), Military Jacks - 10,000 M(omega) minimum (initial), 1,000 M(omega) minimum
Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC
Contact Rating: 1 A, 25 V DC
Thermal Range Commercial (non-operating): -55 to +85 °C
Thermal Range Commercial (operating): -20 to +65 °C
Thermal Range Military Jacks(non-operating): -55 to +85 °C
Thermal Range Military Jacks(operating): -40 to +65 °C
Thermal Shock: Commercial Jacks - Per MIL-STD 202, method 107. Military Jacks - Per MIL-STD 202, method 107
Humidity: Commercial Jacks - Per MIL-STD 202, method 106. Military Jacks - 0% to 95% operating and non-operating
Salt Spray: Commercial Jacks - Per MIL-STD 202, method 101. Military Jacks - Per MIL-STD 202, method 101 (48 hours)
Moisture Resistance: Military Jacks - Per MIL-STD 202, method 106 (240 hours)
Mounting Bushing: Nickel-plated copper alloy
Insulation: Rigid plastic
Springs: Special copper alloy. Integral contacts are standard in the isolated switching circuits; fine silver contacts in C12A switching circuit
Sleeve Terminal: Copper alloy
Hardware: Supplied with one Number P10001 copper alloy nickel-plated hex: