PRO AV CATALOG
1/2 Rack IP Addressable Power Distribution Unit
Model: AP-S15HRIP
- 15A Rack Mount Power Strip with web enabled monitoring & control
- Supports LAN (Local Area Network) type networks
- On-board IP Address display
- IP discovery PC software
- 6 total AC Outlets: 5 rear panel programmable switched outlets, 1 front panel un-switched convenience outlet
- 15A Rack Mount Power Strip with web enabled monitoring & control
- Supports LAN (Local Area Network) type networks
- On-board IP Address display
- IP discovery PC software
- 6 total AC Outlets: 5 rear panel programmable switched outlets, 1 front panel un-switched convenience outlet
- Individual outlet on/off manual switch and LED indicator (enable/disable)
- Removable 15A IEC power cord with retainer bracket
- RFI noise filtering
- Earth ground fault connection indicator
- Web user interface
- DHCP or static IP addressable
- Voltage, current, temperature and humidity monitoring capability
- Over-voltage, current, temperature and humidity alarm settings
- Each outlet can be individually managed remotely
- User-definable names for each outlet
- User-definable delay time and sequence
- Temperature setting for AC fan activation
- Fault log with reporting
- Fault reporting GPIO port
- Password protection
- APRST (Auto PING Reset)
- User-definable 24/7 schedules of individual outlets to switch devices on or off
- 2-Meter humidity/temperature probe
- AP-LEDIP display panel shows voltage, current, temperature, humidity and IP Address
- UL Rated - Yes
- Spec Sheet available - Yes
- System:
- Type: Networked AC Power Distribution Conditioner and Suppressor
- Load Rating: Max Load 15A (1800W), Rated Load 12A (1440W)
- Network Type: LAN, WEB User Interface
- Front Panel:
- Activation Switch: Rocker with Security Bar
- Circuit Breaker: 15A Resettable Power Switch
- Outlet On / Off Switches: Momentary Manual
- AC Outlets: NEMA5-15R Unswitched, Qty 1
- Front Panel Indicators:
- Power On Indicator: Power Switch LED, Red
- Outlet Status Indicators: Green, Qty 5
- Over Temperature Alarm Indicator: Red, Programmable Range 50° - 176°F , 10° - 80°C
- Over Humidity Alarm Indicator: Red, Programmable Range 15 - 95%
- Over Current / Voltage Alarm Indicator: Red, Programmable Range High - Voltage 100V - 140V, Under Voltage 80V- 120V
- AC Fault Indicator: Red, Illuminates When Surge Protection is Damaged
- AC Ground Indicator: Red, Illuminates When Earth Ground Is Bad
- Rear Panel:
- AC Mains IEC Power Socket: IEC NEMA 5-15P 15A 1800W with Power Cord Retainer
- LAN Port: RJ45, Ethernet Port
- Temp / Humidity Port: RJ14, Temperature, Humidity Probe, 2M, Probe Included
- Display Port: RJ25, for AP-LEDIP Display for Voltage, Current, Temperature, Humidity, IP Address
- Fault Report Port: 3.5mm Jack, Fault Reporting Contact Closure, Normally Closed and Opens During Fault State, Cable Included
- GPIO Fault Relay Port: Fault Relay Interface, Temperature, Humidity, Over & Under Voltage, Over Current, Surge, Cable Included
- Operating Temperature (Maximum): 104.90 F
- Operating Temperature (Minimum): 41 F
- AC Voltage (Maximum): 132 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 1440 Watt
- Current Draw: 12 Amps
- Depth: 8.50 in
- Height: 1.75 in
- Width: 10.50 in
- Product Weight: 3.50 lbs
- Shipping Weight: 5.50 lbs
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com