Dante Analog Output Module | Dante Analog Audio Output Adapter Module | Audinate Pty Ltd. | Advanced Sound & Communication

PRO AV CATALOG

Pro AV Catalog
Audinate Pty Ltd. - Dante Analog Output Module
Request Quote
All Products

Dante Analog Audio Output Adapter Module

Model: Dante Analog Output Module

  • Compact form factor designed for overmoulding
  • Excellent audio specs
  • Complete for rapid product development
  • 1x RJ45 Ethernet input connector
  • 1x or 2x Balanced analog connectors output
Compare
Project List
Product Info
Tech Specs
Documents
The Dante Analog Output Module™ is a Dante® audio to analog audio adapter module, supporting one RJ45 Dante input, and one or two balanced analog outputs. It is designed for use in products assembled using an overmold process.
The Dante Analog Output Module is the perfect foundation for your own line of Dante analog output adapters.
Dante Analog Output Module products enable simple connection of analog equipment to a Dante network. The module can receive audio channels from a Dante network and provide studio-quality, low-latency audio via balanced output connectors to analog audio equipment. Any audio available on the Dante network can be routed via the outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analog audio device. Adapters (for example XLR-to-RCA and XLR-to-phono) can be used to connect to audio equipment without the required built-in connectors.
Dante Analog Output Module uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
Dante Analog Output Module features a high-quality digital-to-analog converter, and supports a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network.
As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante Analog Output Module devices connected to the Dante network.
Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.
Manufacturers can use this module in a variety of small footprint enclosures with appropriate analog connectors to rapidly bring complete products to market.
  • Compact form factor designed for overmoulding
  • Excellent audio specs
  • Complete for rapid product development
  • 1x RJ45 Ethernet input connector
  • 1x or 2x Balanced analog connectors output
  • Analog Audio:
  • +4dBu at 0dBFS Balanced output level
  • 150 ohm Balanced or 75 ohm unbalanced output impedance
  • 20Hz to 20 kHz (-/+0.5dB) Frequency response
  • Greater than 100dB dynamic range
  • Greater than 100dB signal to noise ratio
  • Less than 0.01% at +4dBu total harmonic distortion
  • Greater than 100dB channel separation
  • Less than 0.25dB channel matching
  • Dante Audio:
  • 1 or 2 Output channels
  • 44.1kHz, 48kHz (default) and 96kHz Sample rate
  • 24bits Bit depth
  • 100Mbps Network speed
 
Request Quote
 

Suggested Products