PRO AV CATALOG
HDMI Multi-port Extender with HDBaseT Sender
Model: UHBX-4X
- Converts 4 separate HDMI inputs to corresponding HDBaseT™ outputs
- Extends IR in both directions
- Can issue RS-232 or IR commands to any output (requires compatible receiver)
- RS-232 and IP control ports
- Supports HDCP, 3D, Deep Color, CEC, and 4 K (UHD) resolutions
The UHBX-4X provides both IP (Ethernet), and RS-232 ports for control. Using these ports the user can address and send RS-232 or IR commands to any of the receivers to control the remote display. IR signals can also be extended in both directions. Besides being able to create IR commands by itself (via RS-232 or IP control ports), the UHBX-4X provides a jack for an IR detector cable. The IR received by the detector can be routed to any one or combination of outputs. 4 separate IR emitter ports are also provided on the rear of the UHBX-4X which can be used if a user connects IR detectors at each remote location. This would be perfect for controlling multiple sources in a rack with the UHBX-4X.
The extender is constructed as a 1RU rack-mountable unit and has built-in power supply. LED indicators on the front panel show Link Status, HDCP status, Long Reach and Power for each of the 4 outputs. The UHBX-4X is designed and manufactured in the USA. The UHBX-4X can be used by itself, for example in a rack with 4 video sources such as AV receivers, but it can be used in tandem with Hall Research 4x4 HDMI matrix to provide additional cross-point capabilities. Since each device is a 1RU the combination is still only 2 RU. Hall Research also offers short (5 inch) HDMI cables to interconnect the two as shown above.
The UHBX-4X chassis is identical to UHBX-8X and it can be factory upgraded to 8 channels if required.
- Converts 4 separate HDMI inputs to corresponding HDBaseT™ outputs
- Extends IR in both directions
- Can issue RS-232 or IR commands to any output (requires compatible receiver)
- RS-232 and IP control ports
- Supports HDCP, 3D, Deep Color, CEC, and 4 K (UHD) resolutions
- Sturdy 1RU design with built in power supply
- HDBaseT™ Compliant
- Can power compatible receivers through the cable using PoH (requires optional 48v supply)
- Front panel status indicators for power, link, video and more for each channel
- Factory upgradable to 8-channels (UHBX-8X)
- Extender Type - Audio
- Extender Type - DVI
- Extender Type - HDMI
- Extender Type - RS232
- Rackmountable - Yes
- Warranty - Yes
- HDBaseT - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: CE, FCC
- Rack Units (Height): 1
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 30 Watt
- Current Draw: 1.50 Amps
- Depth: 19 in
- Height: 1.75 in
- Width: 7.75 in
- Product Weight: 6.90 lbs
- Shipping Weight: 8 lbs
- Warranty (Length/Type): 2 Years
- Transmission Range: 500 ft
- Regulatory Compliance: HDBaseT
- Video Standards: DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit color depth, 3D video and 4K support)
- Video Signal Type: TMDS
- Video Connectors: Locking HDMI
- Resolutions:
- DVI signal VGA (640x480) thru WUXGA (1920x1200)
- HDTV signal 480i through 1080p
- Digital Cinema 4K (4096x2160) – Not supported in Long Reach
- Audio Formats: All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
- DDC Compliance: Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake. DDC clock must be less than 100 KHz and the source must support clock stretching
- CEC Support: Pass-Thru CEC for Consumer Electronics Control compatible devices
- RS-232: Bidirectional (full-duplex) any baud rate up to 115,200
- IR: Extended in both directions. Carrier modulation range from 30 KHz to 60 KHz
- PoH: Power-over-HDBaseT meets IEEE 802.3af standard. The UHBX-4X supports PoH power to devices that require power up to Class 2 (6.49 watts). Requires purchase of separate supply (Model: 511-PS4812)
- POWER SUPPLY: 100 VAC to 240 VAC, 50-60 Hz, 1.5A, internal
- Power Consumption: 30 watts (102 BTU/hr) maximum
- Temp/humidity: Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
- Cooling: Convection, with internal temperature controlled fan
- Mounting: 1RU high, standard 19" rack
Suggested Products
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com