PRO AV CATALOG

Pro AV Catalog

Speakers : Loudspeakers : Lowell Manufacturing Co. - ES-62T

All Products

Recessed in-ceiling, self-contained speaker system - UL Listed

Model: ES-62T

6-1/2” coaxial driver (7.5 lbs.) with 32W transformer. Tap selector switch is mounted behind the grille with selections for 25V, 70V or 100V speaker systems and 4 ohm (UL minimum) transformer bypass position.
Low-profile front baffle formed from UV-rated high-impact plastic
Durable 20 gauge zinc-plated steel enclosure
Built-in reversible mounting dogs aid fast installation, while allowing speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 2.125” (54mm).
Ported enclosure tuned for extended bass response

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ES-62T speaker system produces excellent intelligibility for speech and full-frequency response for music, making it ideal for retail, commercial, industrial, institutional and residential applications. This self-contained, in-ceiling speaker system with 6-1/2” (165mm) coaxial driver has a high-frequency PEI?tweeter with acoustic lens that provides the kind of crisp, high-frequency response that’s expected from high-quality coaxial speaker designs.

6-1/2” coaxial driver (7.5 lbs.) with 32W transformer. Tap selector switch is mounted behind the grille with selections for 25V, 70V or 100V speaker systems and 4 ohm (UL minimum) transformer bypass position.
Low-profile front baffle formed from UV-rated high-impact plastic
Durable 20 gauge zinc-plated steel enclosure
Built-in reversible mounting dogs aid fast installation, while allowing speaker to be mounted in drywall, wood, tile or almost any type of ceiling with thickness up to 2.125” (54mm).
Ported enclosure tuned for extended bass response
Removable (four-pin) Phoenix-style connector with two terminals for input to speaker, and two parallel terminals for output to next speaker in string.
Mounting C-ring and two support rails prevent sagging when installed in lay-in tile ceilings.
Press-fit, fine-mesh grille (white) with scrim and pull tool
Paper template to assist in cutting mounting holes

Loudspeaker Mount Type - Ceiling
Spec Sheet available - Yes

Power Handling: 50W RMS (at 8 ohms) measured per EIA Standard RS-426B
Sensitivity: 88.6 dB log average SPL (at 8 ohms) @ 1W/1M over the frequency response range, measured in half-space.
Maximum SPL: 105.6 dB (calculated based on power rating and measured 8 ohm sensitivity).
Impedance: 8 ohms (nominal), 4.0 ohms @ 12461 Hz (minimum). Note Selector knob shows 4 ohm position as mandated by
Frequency Response: 64Hz – 20kHZ ± 6dB
Dispersion Angle: 120° conical @ 2kHz octave (-6dB)
Crossover Frequency: 3kHz
Transformer Taps:
- 100V (32, 16, 8, 4.2W)
- 70V (32, 16, 8, 4, 2W)
- 25V (4.4, 2.2, 1.1, .55, .28W)
- Woofer Cone: Specially formulated polypropylene
- Surround: Rubber
- Woofer Magnet Weight: 15.45 oz. (438.1g)
- Woofer Voice Coil dia.: 1” (25.47mm)
- Tweeter Cone: PEI with acoustical lens
- Tweeter Magnet Weight: 0.64 oz. (18.09g)
- Tweeter Voice Coil dia.: 1” (25.47mm)
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Impedance: 8 ohm
- Sensitivity: 88.60 dB
- Power Handling: 50 Watt
- Minimum Frequency Response (Bandwidth): 64 Hz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Product Weight: 7.50 lbs