PRO AV CATALOG
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Companion Device for Dimmer/Switch
Model: GT-AD-WH
- companion device works with dimmer or switch
- Simple touch control
- Distinctive architectural aesthetic
- Softly lit white LEDs indicate light level and coordinate with any decor
- Models available with or without Clear ConnectR RF wireless technology
Product Info
Tech Specs
Related Products
Documents
GT-AD-WH is a companion device works with dimmer or switch.
- companion device works with dimmer or switch
- Simple touch control
- Distinctive architectural aesthetic
- Softly lit white LEDs indicate light level and coordinate with any decor
- Models available with or without Clear ConnectR RF wireless technology
- Advanced microprocessor dimming technology for control of dimmable LED lamps
- Low-end and high-end trim are available for improved
- Installs in single-pole or multi-location applications. Companion devices are available for multi-location control with dimmers.
- Use LutronR GRAFIK TTM wallplates. All controls come with white wallplate. Other colors and finishes are sold separately
- LutronR GRAFIK TTM wallplates snap on with no visible means of attachment
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Certifications: UL, FCC
- AC Voltage: 120 Volts
- Color: White
- Warranty (Length/Type): 1 Year Limited
- Typical Power Consumption:
- Companion device: 0.1 W
- Test conditions: load is off
- Environment:
- Relative humidity: 0% to 90% non-condensing
- For indoor use only.
- Performance:
- Power failure memory: should power be interrupted, the control will return to its previous state when power is restored.
- Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
- Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
- Dimmers / Switches communicate with PicoR wireless controls or Radio Powr SavrT sensors through Radio Frequency (RF) and must be located within 30 ft (9 m) of these devices (GTJ models only). Companion devices do not have Clear ConnectR RF technology and are not required to be within a specific range of these devices.
- Uses conventional 3-way and 4-way wiring.
- Total multi-location wire length (blue wire) between all units must not exceed 150 ft (45 m).
- Application Requirements:
- When using LEDs, only Lutron® approved lamps marked or rated as Dimmable can be used.
- If using LED bulbs, they must be Lutron compatible! For compatibility and performance information, visit our website at www.lutron.com/led, which is constantly being updated.
- Mounting:
- Requires a U.S. wallbox. 3-1/2 in (89 mm) deep recommended, 2-1/4 in (57 mm) deep minimum.
GT-150-WH
- 150W Single Pole Dimmer for LED/Incandescent/Halogen Lighting, White
GT-250M-WH
- 250W Multi-location Dimmer for LED/Incandescent/Halogen Lighting
GT-5ANSM-WH
- Multi-location Switch for LED/Incandescent/Halogen Lighting, White
Dimmer/Switch
5000 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact Advanced Sound & Communication
close
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com
Contact in regards to this product:
Lutron Electronics Company, Inc.
Model: GT-AD-WH
For US/Canada Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you