PRO AV CATALOG

Pro AV Catalog

Speakers : Subwoofers : Neumann - KH 805

All Products

10" Active Studio Subwoofer

Model: KH 805

Bass extension for loudspeakers down to 18 Hz
Increasing the maximum SPL of loudspeakers by up to 8 dB
Decreasing harmonic and intermodulation distortion of loudspeakers
Reproducing the LFE channel
Reproducing the “Sub” signal of a bass managed multichannel source

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The KH 805 has a unique 2.1/0.1 Bass manager which enables it to be used in many different applications. There are four routing modes to ensure maximum flexibility. Fourth order crossovers and adaptable acoustical controls allow for seamless system integration, and the bass management function can be remotely controlled.

Bass extension for loudspeakers down to 18 Hz
Increasing the maximum SPL of loudspeakers by up to 8 dB
Decreasing harmonic and intermodulation distortion of loudspeakers
Reproducing the LFE channel
Reproducing the “Sub” signal of a bass managed multichannel source
Making a Plane Wave Bass Array™ system
Working as an extension for KH 810, KH 870 and KH 805 subwoofer systems
2.0/ 0.1 Bass Management for stereo and externally bass managed applications
Bypassable 4th order 80 Hz active crossover for maximum compatibility with consumer reproduction
Four routing modes on right input connector:
Right channel bass management
LFE to subwoofer only up to 120 Hz
Wide for multichannel systems where the bass management is in the source
Daisy chain for subwoofer arrays
Acoustical controls adapt the subwoofer’s response to the environment
Output level
Low cut
Parametric equalizer
45° step phase control
Larger systems and Plane Wave Bass Arrays™ maybe constructed using the Daisy Chain output
Remoteable electronics (REK 3) for installation convenience, less cabling, and convenience of use
Integrated electronic limiter for amplifier and driver protection
Low heat dissipation amplifier
Low frequency extension for main loudspeakers down to 18 Hz
Low distortion magnetically shielded long-throw driver
Reduced bass compression at high SPL from generously proportioned bass reflex ports
Allows main loudspeakers to play louder and with lower distortion
Wooden cabinet with a tough painted finish (anthracite) and high density rubber isolating feet
Excellent self-damping properties leading to minimal cabinet resonances
Cabinet look conforms to the family design

Speaker Diameter (Driver): 10 in
Maximum Frequency Response (Bandwidth): 300 Hz
Maximum Frequency Response (Bandwidth): 0.30 kHz
Minimum Frequency Response (Bandwidth): 18 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Finish: Painted
Impedance: 13000 ohm
Maximum SPL (Sound Pressure Level): 112 dB
Power Handling: 160 Watt
Sensitivity: 114 dB
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Active Power: 280 Watt
Depth: 25.39 in
Height: 14.17 in
Shipping Depth (with packaging): 29.53 in
Shipping Height (with packaging): 20.28 in
Shipping Width (with packaging): 19.29 in
Width: 12.99 in
Product Weight: 57.32 lbs

REK 3 - REK 3 - A kit to locate the KH 805/810/870 electronics panel up to 30 m (90’) away from the loudspeaker cabinet. A standard 4-pole Speakon terminated loudspeaker cable, available from third parties, is required

Subwoofer 2012 kb - Brochure

Project List