PRO AV CATALOG
20 Watt Stereo Audio Power Amplifier
Series:
Model: EZ-PA20
- Audio Amplifier with Front-Panel Level Control
- 10 Watts RMS Per Channel into 8 Ω
- 8 Watts RMS Per Channel into 4 Ω
- Switch-Selectable Load Impedance on Rear Panel
- Unbalanced Line Input on RCA Jacks
- Audio Amplifier with Front-Panel Level Control
- 10 Watts RMS Per Channel into 8 Ω
- 8 Watts RMS Per Channel into 4 Ω
- Switch-Selectable Load Impedance on Rear Panel
- Unbalanced Line Input on RCA Jacks
- Switch-Selectable Mono or Stereo Mode
- Integral Overload Limiter with LED Indicator
- Limiter Controls Overloads from Clipping
- Limiter Produces Output Level Comparable to Higher Power Amps
- Mono Mode Switch Sums Left and Right Inputs
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- input:: > 10 kΩ, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max.
- Gain:: Off to 32 dB
- Outputs (2):: Left and Right, 10 Watts RMS into 8 Ω per channel or 8 Watts RMS into 4 Ω per channel, switchΩselectable output impedance
- Frequency Response: 35 Hz to 20 kHz (±1.5 dB, 10 Watts)
- THD+N:: < 0.25%
- Crosstalk:: < -68 dB (1 kHz)
- Noise:: < -70 dB (below 10 Watts)
- 24 Vdc power supply current:: 160 mA (idle), 1000 mA (max.)
- Case dimensions:: 5.75” (14.6 cm)W
- Total Harmonic Distortion + Noise (THD+N): 0.25 %
- DC Voltage: 24 Volts
- Depth: 5 in
- Width: 5.75 in
- Shipping Weight: 1.35 lbs
Component Chassis for 6 Increments of 1/6 Rack Width
EZ-DC2
Desktop Chassis for 1/3 Rack Width EZ Products
EZ-FP1
Filler Panel - 1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-RA6
Rack Adapter for 6 Increments of 1/6 Rack Width
EZ-SD1
Storage Drawer-1/6 Rack Width for EZ-RA6 or EZ-CC6
EZ-SD2
Storage Drawer - 1/3 Rack Width for EZ-RA6 or EZ-CC6
EZ-SMB2
Surface Mount Bezel for 1/3 Rack Width EZ Products
EZ-UCB2
Under Counter Bracket Pair for all EZ Product Widths
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com