PRO AV CATALOG
35 W Mono Audio Amplifier 25 V, 70 V or 100 V, with Power Supply
Series: FLAT-PAK
Model: FP-PA35A
- 35 Watts RMS Constant Voltage Amplifier
- 25 V, 70 V or 100 V Output
- Automatic Energy-Saving Sleep Mode
- Selectable Sleep Delay: Off, 5, 15, 25 Minutes
- Input / Output Terminal Block Connections
- 35 Watts RMS Constant Voltage Amplifier
- 25 V, 70 V or 100 V Output
- Automatic Energy-Saving Sleep Mode
- Selectable Sleep Delay: Off, 5, 15, 25 Minutes
- Input / Output Terminal Block Connections
- Line Level Balanced or Unbalanced Input
- Compressor/Limiter Controls Clipping
- LED to Indicate Audio Compression Threshold
- Compressor Produces Maximized Average Output Power
- Audio Quality Superior to Standard Amplifiers
- Ultra-compact All Metal Construction
- High-Efficiency Class D Operation
- Thermal and Short-Circuit Protection
- Amplifier Signal Type - Audio
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 50 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Shipping Weight: 3.90 lbs
- Depth: 6.04 in
- Height: 2.80 in
- Width: 3.25 in
- INPUT: Line level (+4 dBu nominal balanced; -10 dBV nominal unbalanced)
- Input Impedance: 20 kohm balanced bridging; 10 kohm unbalanced
- Input / Output Connectors: Detachable terminal block
- Gain Adjustment: Single turn audio taper
- Minimum Input Levels: Balanced: -14 dBu; Unbalanced: -15 dBV (to cross compressor threshold)
- Maximum Input Levels: Balanced: +22 dBu; Unbalanced: +20 dBV
- Compressor: Threshold 2 dB below rated output, automatic adjusting attack and release times
- Noise: <-75 dB (below 35 W RMS)
- CMRR: > 60 dB (50 Hz to 120 Hz)
- Output Power: 35 W RMS @ 25 V, 70 V or 100 V
- Sleep Mode Power Consumption: < 1 W (amplifier and included power supply)
- Sleep Mode Delay: 5, 15 or 25 minutes (selectable)
- Sleep Mode Disable: Selectable
- Active Mode Delay: < 150 mS after input audio detected
- Audio Detector Threshold: -50 dBu balanced, -52 dBV unbalanced
- Indicators (2): Red LED: PEAK LED indicates compressor activity, Blue LED: Power ON, Dim: Sleep mode active; Bright: Amplifier active
- Power Supply (included): 100 to 240 Vac, 50-60 Hz, 1.3 A, IEC C14; Output to module: 24 Vdc, 2 A, Ground-referenced
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com