PRO AV CATALOG
8 Channel 125W, 4 Channel 70/100V 250W DSP Matrix Amplifier
Model: RTI-AMP8-125
- Eight analog audio source input channels (balanced or unbalanced) and one digital input (S/PDIF).
- Four Lo-Z stereo or eight Lo-Z mono output zones, four Hi-Z mono output zones, or a mix of both.
- Class D amplifier provides a robust and clear audio experience with 125 Watts at 4O/8O per channel or 250W at 70V/100V per channel.
- Daisy-chain multiple amplifiers to expand the number of zones by distributing up to two audio inputs or zones.
- Built-in DSP allows for fine-tuning acoustic characteristics for each zone.
The AMP-8-125 power amplifier delivers configurable and reliable high-performance audio power amplification for commercial and hospitality applications that demand a mix of low impedance and high impedance outputs. With a compact 1U design, this DSP-enabled Class-D amplifier can drive low impedance 4Ω to 16Ω loudspeakers as well as high impedance 70V/100V transformer-coupled loudspeakers. The AMP-8-125 can accept eight balanced or unbalanced analog inputs and one stereo S/PDIF digital input and delivers eight low impedance mono channels (or four low impedance stereo zones) at 125W per channel, or four 70V/100V mono channels at 250W per channel.
For set-up, the RTI web GUI enables effortless browser-based configuration of the installed system. Its DSP configuration options include multizone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker presets, delay, Wall-S1 controller configuration, sine wave generator, and more.
Included in the box:
AMP-8-125, power cord, 6-pin Phoenix input connectors (4), 4-pin Phoenix output connectors (4), 8-pin Phoenix GPIO socket connector (1), rack-mount kit (1), adhesive rubber feet (4)
- Eight analog audio source input channels (balanced or unbalanced) and one digital input (S/PDIF).
- Four Lo-Z stereo or eight Lo-Z mono output zones, four Hi-Z mono output zones, or a mix of both.
- Class D amplifier provides a robust and clear audio experience with 125 Watts at 4O/8O per channel or 250W at 70V/100V per channel.
- Daisy-chain multiple amplifiers to expand the number of zones by distributing up to two audio inputs or zones.
- Built-in DSP allows for fine-tuning acoustic characteristics for each zone.
- Easy configuration via LAN or Wi-Fi.
- IP and GPIO control options.
- Free-standing installation or rack-mount (rack-mount kit included).
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 12.60 in
- Height: 1.75 in
- Impedance: 8 ohm
- Width: 17.35 in
- Standby Power: 0.50 Watt
- Product Weight: 8.40 lbs
- Active Power: 150 Watt
- Color: Black
- Warranty (Length/Type): 3 Years
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Signal to Noise Ratio: 106 dB
- Total Harmonic Distortion + Noise (THD+N): 0.05 %
- Number of Watts Per Channel: 125 Watt
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Number of Channels: 8
- Analog Sources: 8 RCA (Unbalanced Stereo) 8 Phoenix Connector (Balanced Stereo)
- Digital Sources: 1 Coax
- Amplified Zones: 4 (8 Channels)
- Audio Zone Expansion: Daisy-chain multiple AD-8-125 units via Digital In/Out
- Amplifier: Class D
- Output Power at 4OHMS/8OHMS: 8 x 125W
- Output Power at 70V/100V: 4 x 250W
- Output Voltage: 45 Vrms (S.E), 70/100V (Hi-Z)
- Power Share: Up to 2 x 250W (across each channel pair)
- Protection Circuits: Short circuit, DC, Undervoltage, Temperature, and Overload protection
- RTI or 3rd Party Control: IP (RJ45), GPIO (Phoenix Connector)
- Power Supply: UREC™ universal mains switch mode power supply with Power Factor Correction (PFC) and standby converter
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com