PRO AV CATALOG
ILD100DC Induction Loop Driver (XX) - 110VAC Mains PSU
Model: DCILD100USXX
The IDL100 has been designed as a high quality amplifier for small to medium size induction loop systems in places such as video conference facilites, meeting rooms, small seminar rooms, TV rooms, nursing homes, private homes, reception and waiting rooms.
- Warranty - Yes
- Wireless Receiver Transmission - Loop
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 32 F
- Maximum Frequency Response (Bandwidth): 6.50 kHz
- Maximum Frequency Response (Bandwidth): 6500 Hz
- Minimum Frequency Response (Bandwidth): 80 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- AC Voltage (Maximum): 230 Volts
- AC Voltage (Minimum): 120 Volts
- Active Power: 15 Watt
- DC Voltage: 12 Volts
- Depth: 8.50 in
- Height: 1.73 in
- Width: 4.88 in
- Product Weight: 2.65 lbs
- Sustainability Rating: IP20
- Microphone Input: 2 inputs: 3.5mm mono connector for electret microphones input DC powering for electret capsules. (Requires MAT60 adaptor to take XLR balanced microphone input). Front panel recessed gain control
- Line input: 2 x phono (RCA) connectors, impedance 60kOHMS each side, 20kOHMS differential. Sensitivity matched to SCART signal level. Front panel recessed gain control
- Drive voltage: 3.0Vrms (4.2Vpk) at maximum output current
- Drive current: 3.4Arms (4.8Apk) continuous 1kHz sine wave, Short term peaks. 6.5A, Front panel recess drive control, Front panel LED indicates current peaks
- Loop connector: Lever cable clamp
- Automatic Gain Control: The AGC is optimised for speech. Dynamic range [gt]36dB, Front panel recessed input level control
- Tone Control: Front panel recessed control
- VOX switching: To control prioritisation of microphone 1 input. 4 different actions when microphone 1 level is at the onset of compression. Options to attenuate or turn off other inputs when microphone 1 is active, and to turn microphone 1 off when below threshold if required
- Mobile applications: A DC version is available which provides similar performance for mobile applications, powered from a 12V DC supply
- Cooling: Cooling is by natural convection from the product casing
- Mounting: Freestanding Wall mounting - mounting holes provided on rear panel
Advanced Sound & Communication
3817 Broadway
Kansas City, MO 64111
USA
(816) 931-9525
www.advancedsoundkc.com